- Contact Us
Standard models range from 3 trays to 96 trays
Used for drying of high grade temperature and oxygen sensitive products. Highly suitable for drying hygroscopic substances which are dried to very low residual moisture content levels. Frequently vacuum drying cabinets are the sole possibility for drying lumpy, glutinous products or products of low pomposity. We are manufacturer, supplier and exporter of vacuum tray dryer as per ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the globe.
鸭脖体育app,亚博最新,亚博吧Vacuum tray dryer is the most commonly used batch dryer. They are either box – shaped or cylindrical shaped loaded and unloaded via a door. Inside are several heating plates mounted one above the other on which the product is placed in trays .The Top of both heating plates (Shelves) and the bottom of heating shelves trays should be as smooth as possible to permit optimal heat transfer between plates and product. The medium flowing through the heating plates is water, steam, or thermal oil. The distance between the heating plates is determined primarily by the surface loading and the foaming of the product. To avoid retrograde condensation, the cabinet walls are indirectly preheated by limpet coil provided on the outer side of the body (Optional). Only after all the product trays reach the same temperature, the cabinet is evacuated and drying can start. (The preheating phase is very important in order that the drying curve and the foaming of product are identical throughout the cabinet). During the main drying phase the vacuum is in the range of 40 to 80 mbar abs and in the final drying phase vacuum of only few mbar abs are reached. The vacuum can be controlled through PLC in order to reduce the drying cycle. Nitrogen can also be purged in the VTD according to the product.
鸭脖体育app,亚博最新,亚博吧The dimensioning of the vacuum system is an important factor in the design of drying cabinet systems .If for example vigorous foaming of the product is desired, evacuation to the operational vacuum level must take place very quickly. Vapors produced during drying are taken out directly to a surface condenser in which the vapours condenses. Non-condensable vapours are extracted by the vacuum system. On completion of the drying, the product can be cooled by circulating of cooling water through the heating plates.
Vacuum tray dryers with watering vacuum pump & high vacuum Rotary oil ring Pump can be providing Promas Edge Over the other Manufacturers of vacuum tray dryers.